给定任务和模式下指挥体系节点重要性评估方法

针对一般节点重要度评估方法没有考虑指挥体系网络与外界的交互以及自身运行机制的问题,研究了指挥节点的重要度评估方法,在一般网络结构重要度分析基础上,综合作战任务和指挥模式对节点的需求,提出了作战任务对节点依赖度以及指挥模式对节点依赖度的计算方法,最后设计了评估算法并给出具体算法流程,案例分析结果证明该算法合理、有效。     

电磁发射装置电-磁-热场分布的分析与仿真

为探讨电磁发射过程中出现的热烧蚀现象,构建了电磁发射及电接触层接触电阻的模型,推导出电-磁-热场耦合方程,采用有限元数值计算方法得到了在脉冲电流激励下,轨道和电枢间电流密度、磁感应强度及温度的分布图。计算过程表明:电磁发射过程实际是电-磁-热场的耦合过程,接触电阻是造成电磁发射热损耗的主要原因之一,接触电阻使得轨道和电枢接触表面区域的电流密度极大,容易造成轨道材料的烧蚀。     

舰艇编队海上运输补给物资需求预测方法

按照是否与任务、事件相关,将物资需求分为两类,对于任务、事件相关物资需求的预测,将任务进行合理的分解,并根据物资消耗与任务、事件之间的关系,给出了预测的一般模型;对于与任务、事件联系不紧密的物资需求的预测,则根据历史经验及该物资固有的消耗规律,提出了经验预测模型。为了解决舰艇编队海上运输补给物资需求预测所存在的问题,利用案例推理的方法生成了预测所需的样本数据,以最小二乘向量机(LSSVM)模型为预测模型,并以岛屿进攻作战的防空弹药需求预测为例进行了实例分析。结果表明:案例推理生成的样本数据可用,选用LSSVM模型的预测结果与其他预测模型表现出了一致性,但LSSVM相对误差较小;该方法在某种程度上解决了样本数据有限的问题,适用于作战物资需求的预测问题。     

建筑太阳能光电热一体化系统的瞬态性能模拟

利用TRNSYS软件对重庆夏季建筑屋顶太阳能光电热一体化系统进行瞬态模拟分析计算,得到系统瞬时发电量与一段时间内累计发电量,光电热模块瞬时进出水温度与太阳能平板集热器瞬时进出水温度,系统一段时间内光电热模块累计有效得热量与一段时间内太阳能平板集热器累计有效得热量,系统的光电转换效率、光热转换效率以及太阳能综合利用效率。结果表明,建筑屋顶太阳能光电热一体化系统是重庆地区建筑太阳能光电热一体化系统适宜的型式。     

温升热源条件油气热着火关键因素探究

通过对影响油气受热着火的关键因素进行研究,为发展主动防护技术提供理论依据。基于系统的实验和分析,探究了快速氧化现象、热源加热速度、热源面积与爆燃空间比例对热着火发生时临界浓度、着火概率和着火延迟期的影响,提出了温升热源条件受限空间能否发生热着火的综合判据。该判据认为：如果油气体积分数低于2.4％,受限空间体积与热源面积比值小于0．64m,那么即使温度达到873K,湿度降低到18％～21％,着火也不会发生。     

Preparation of ammonium nitrate-based solid composite propellants supplemented with polyurethane/nitrocellulose blends binder and their thermal decomposition behavior

To improve the performance of solid composite propellants (SCPs) supplemented with ammonium nitrate (AN) as an oxidizer, the incorporation of energetic ingredients such as explosives, energetic binders or catalysts is a common effective approach. For this purpose, polyurethane (PU), a typical inert binder, was mixed with nitrocellulose (NC) as an energetic polymer. Numerous composite solid propellant compositions based on AN and NC-modified polyurethane binder with different NC ratios were prepared. The prepared formulations were characterized using Fourier transform infrared spectroscopy (FTIR), RAMAN spectroscopy, X-ray diffraction (XRD), electron densimetry, thermogravimetric (TG) analysis, and differential scanning calorimetry (DSC). A kinetic study was then performed using the iterative Kissinger-Akahira-Sunose (It-KAS), Flynn-Wall-Ozawa (It-FWO), and non-linear Vyazovkin integral with compensation effect (VYA/CE) methods. The theoretical performances, such as theoretical specific impulse, adiabatic flame temperature, and ideal exhaust gaseous species, were also determined using the NASA Lewis Code, Chemical Equilibrium with Application (CEA). Spectroscopic examinations revealed the existence of NC and full polymerization of PU in the prepared propellants. According to density tests, the density of the propellant increases as the nitrocellulose component increases. According to the thermal analysis and kinetics study, the increase in NC content catalyzed the thermal decomposition of the AN-based composite solid propellants. Based on the theoretical study, increasing the amount of NC in the propellant increased the specific impulse and, as a result, the overall performance.     

聚合物材料热危险性分析

聚合物材料具有的易燃性或可燃性使其在实际应用中具有潜在的火灾危险性,正确分析评价聚合物材料的火灾危险性,对材料的安全使用和火灾预防与控制具有重要的作用。在综述文献的基础上,根据火灾危害的特征,对聚合物材料的引燃、热释放和火焰传播等热危险性进行了分析和总结,并提出了相应的预防对策。     

基于金属热变形的散斑干涉测温技术研究

从热传导和热弹性理论出发,得出轴对称金属薄板温度应变模型;利用ANSYS有限元计算分析软件分析金属薄板的热变形状态,并与建立的模型进行比对验证;搭建了基于CCD、计算机、激光光源的散斑干涉温度测量实验平台,以钢质薄板作为实验对象,记录不同温度下对应薄板热变形的散斑图像数据;得到了散斑干涉条纹与钢板热应变的对应关系,进而得到了温度与热应变的关系。通过理论分析和散斑干涉实验平台获得的实验数据验证表明,金属热变形温度测试技术方案可行,为兵器、航天领域振动、腐蚀等恶劣条件下的温度测试,提供了一种全新方案。     

重庆地区复合抛物面聚光型PV/T系统实验

为了能够更加高效地利用太阳能资源,在重庆地区设计并搭建了实验平台,对不同季节复合抛物面聚光型PV/T系统(CPC-PV/T)进行了实验研究。结果表明:尽管重庆地区太阳能资源匮乏,但加入复合抛物面聚光器后,PV/T系统的整体光电转换效率最高可达到17.07%,系统全天光热转换效率达到58.2%。因此,该地区在夏季进行太阳能光电热综合利用是完全可行的,春、秋季太阳较好的天气也可利用。     

Estimation of the kinetic parameters for thermal decomposition of HNIW and its adiabatic time-to-explosion by Kooij formula

A differential/integral method to estimate the kinetic parameters (apparent activation energy E_a and pre-exponential factor A) for thermal decomposition reaction of energetic materials based on Kooij formula are applied to study the nonisothermal decomposition reaction kinetics of hexanitrohexaazaisowurtzitane (HNIW) by analyzing nonisothermal DSC curve data. The apparent activation energy (E_a) obtained by the integral isoconversional non-isothermal method based on Kooij formula is used to check the constancy and validity of apparent activation energy by the differential/integral method based on Kooij formula. The most probable mechanism function of thermal decomposition reaction of HNIW is determined by a logical choice method. The equations for calculating the critical temperatures of thermal explosion (T_b) and adiabatic time-to-explosion (t_TIad) based on Kooij formula are used to calculate the values of T_b and t_TIad to evaluate the thermal safety and heat-resistant ability of HNIW. All the original data needed for analyzing the kinetic parameters are from nonisothermal DSC curves. The results show that the kinetic model function in differential form and the values of E_a and A of decomposition reaction of HNIW are 3(1 − α)[−ln(1 − α)]^2/3, 152.73 kJ mol⁻¹ and 10^11.97 s⁻¹, respectively, and the values of self-accelerating decomposition temperature (T_SADT), T_b and t_TIad are 486.55 K, 493.11 K and 52.01 s, respectively.